Description of the NL3345 – Fixed-height stainless steel table pedestal – 674 mm

The NL3345 fixed-height table pedestal from NOVAL is a two-part stainless steel column with a mirror-polished finish, designed for single or multiple-leg table installations on board yachts and pleasure craft. With a fixed height of 674 mm, it provides a comfortable dining or chart-table height without any motor, wiring or electronic control to install.

The pedestal is fitted with a large 400 x 400 mm base plate for fastening to the cabin sole or cockpit deck, and a 250 x 188 mm top plate to receive the tabletop. The generous footprint of the lower plate spreads loads over a wide area of the supporting structure, which is a key point on a moving vessel where the table is regularly leaned on.

Its mirror-polished stainless steel construction is suitable for interior and exterior installation: in the saloon, the dinette, the flybridge or the aft cockpit. The polished surface is easy to clean and keeps its premium appearance when properly cared for, even in a salty marine atmosphere.

The main strength of this nautical table base is its design consistency. It is visually compatible with the whole NOVAL range of two-stage mirror-polished electric table pedestals (NL0885, NL0886, NL1180, NL1181, NL1910 and their synchronized -SYNC versions, including NL1911-SYNC). Yacht builders and refit yards can therefore combine an electric table in the saloon with a fixed table in the cockpit (or vice versa) while keeping a uniform style throughout the boat.

Specifications

Type: Fixed-height table pedestal, for single or multiple-leg tables
Construction: 2-part assembly
Material: Stainless steel
Finish: Mirror polished
Height: 674 mm
Base plate (floor): 400 x 400 mm
Top plate (tabletop): 250 x 188 mm
Power supply: None – no motor, no wiring
Use: Interior and exterior
Design range: Matches NOVAL two-stage mirror-polished electric table pedestals

Installation / Maintenance

Installation:

Fasten the 400 x 400 mm base plate to a rigid, reinforced sole or deck using suitable marine-grade stainless steel fasteners.
For exterior installations, bed the base plate with a marine sealant to prevent water ingress into the deck core.
Fix the tabletop on the 250 x 188 mm top plate and check that it sits level and free of play before use.
No electrical connection is required, which makes the NL3345 a quick fit for new builds and refits alike.

Maintenance:

Rinse with fresh water after exposure to salt spray, then wipe dry with a soft cloth.
Clean regularly with a non-abrasive stainless steel cleaner to preserve the mirror finish and prevent tea staining.
Periodically check the tightness of the base and tabletop fasteners.

Our review

✔️ Pros :

Premium mirror-polished stainless steel finish.
Suitable for both interior and exterior use.
Wide 400 x 400 mm base plate for excellent stability.
No wiring, no motor: simple installation and zero electrical maintenance.
Same look as the NOVAL electric table pedestals for a consistent onboard design.

❌ Cons :

Fixed height: the table cannot be lowered to coffee-table or berth level.
The 400 x 400 mm base plate requires a sufficiently large and flat mounting area.
Polished stainless steel requires regular cleaning outdoors to stay spotless.

Conclusion

The NL3345 is the right choice if you need a strong, elegant yacht table pedestal at a fixed dining height, with no electrical installation. It is particularly relevant on boats already equipped with NOVAL electric table pedestals, as it keeps the same mirror-polished look on every table aboard. If you want to convert your table into a coffee table or a berth base, choose a two-stage electric pedestal from the NOVAL range instead.

Good to Know

Fixed height of 674 mm – check the final height including the tabletop thickness.
Check that the 400 x 400 mm base plate fits the available floor space before ordering.
Visually matches the NOVAL two-stage mirror-polished electric pedestals: NL0885, NL0885-SYNC, NL0886, NL0886-SYNC, NL1180, NL1181, NL1181-SYNC, NL1910 and NL1911-SYNC.
Suitable for cockpit use – regular fresh water rinsing keeps the finish in top condition.

English spoken

On parle Français

Call us: +33 6 33 30 44 50 Chat on WhatsApp Contact us by e-mail

NOVAL Marine Systems

NOVAL, a specialist in the design and mass production of innovative mechatronic systems, has developed a complete range of products for the yachting industry, whether sailing or motorboating.

Its YACHT AUTOMATION division has changed its name and is now known as NOVAL MARINE SYSTEMS.

NOVAL has designed numerous solutions for its customers, including automated sunroofs, motorized bay openings, sailboat companionways, retractable bathing ladders, flat-screen elevators and any other solution requiring automation.

These solutions are offered at different levels of integration, from mechatronic functions to complete, ready-to-install functional systems.

NL3345 2-stage electric table lift in mirror

Click to enlarge

2-TIER STAINLESS STEEL TABLE BASE – FIXED – H = 674mm-NL3345

Name: 2-TIER STAINLESS STEEL TABLE BASE - FIXED - H = 674mm-NL3345 | NAUTICSPARES | Boat & Yachts Spares Supplier
Brand: NOVAL Yacht
SKU: NL3345
Price: 967.00 EUR
Availability: InStock

See translation

The NL3345 fixed table pedestal is a robust and elegant marine table base designed for single or multiple-leg table installations on board yachts, sailing boats and motorboats.

Manufactured in mirror-polished stainless steel, this two-part boat table leg offers a fixed working height of 674 mm and suits both interior saloons and outdoor cockpits.

Visually matched to the NOVAL two-stage mirror-polished electric table pedestals (NL0885, NL0886, NL1180, NL1181, NL1910 and their -SYNC versions), it ensures a consistent look across fixed and motorized tables on the same vessel.