Description of the traction gas spring 100099
The 100099 traction gas spring is a stainless steel tension strut made by Associated Spring Raymond (Ressorts Spec) and originally supplied to Dufour Yachts. A standard gas spring pushes its rod out. A traction gas spring works the other way: at rest the rod is retracted, and the strut pulls its two fixing points together with a force of 800 N. Pulling the ends apart extends the unit over a 400 mm stroke, from 550 mm to 950 mm between fitting centres.
This pulling action is used on boats wherever a part must be drawn back, held down or counterbalanced from the opposite side, for example on hatches, lockers or panels where a compression strut cannot be fitted the right way round. The body, rod and end fittings are all made of AISI 316 stainless steel, the reference grade for marine use. It holds up well to salt-laden air, spray and the damp conditions found in lockers and under the deck of a sailing yacht.
The tension gas strut has a 28 mm diameter body and a 10 mm rod. Both ends are threaded M8 x 1.25 and fitted with 13 mm stainless steel ball sockets with spring clips, so the strut can swivel freely as the mechanism moves through its arc. The reference is printed on the body for easy identification when you need a replacement.
The manufacturer has since released the 100107 as the updated version of this part. It keeps the same lengths, stroke, force, materials and ball sockets, and adds a 23 mm internal rod support that guides the rod over its long stroke. Both versions mount the same way, so the 100107 can replace a worn 100099 directly.
Specifications
- Type: Traction (tension) gas spring
- Reference: 100099
- Force: 800 N
- Stroke: 400 mm
- Length at rest (retracted, between centres): 550 mm (± 2 mm)
- Extended length (between centres): 950 mm (± 2 mm)
- Body diameter: 28 mm
- Rod diameter: 10 mm
- Thread: M8 x 1.25 at both ends
- End fittings: 13 mm stainless steel ball sockets with spring clip (both ends)
- Material: 316 stainless steel body, rod and end fittings
- Updated version: 100107 (same dimensions, with internal rod support)
Installation / Maintenance
Installation:
- Check the orientation: the 100099 pulls its ends together and does not push them apart like a standard gas strut.
- The centre-to-centre distance between the two ball studs must stay between 550 mm and 950 mm over the whole movement.
- Use 13 mm ball studs on M8 threads fixed to a rigid structure, preferably also in stainless steel to avoid galvanic corrosion.
- Avoid side loads on the rod. The ball sockets let the strut follow the movement freely.
Maintenance:
- Rinse with fresh water from time to time and keep the rod clean. Salt crystals on the rod can damage the seal.
- Never paint, heat, open or drill the cylinder, which is pressurised.
- A strut that has lost force cannot be refilled and must be replaced.
Our review
✔️ Pros :
- 316 stainless steel construction, well suited to marine use.
- Original-equipment dimensions for Dufour Yachts.
- Pulling action for setups where a compression strut cannot be used.
- Supplied with ball sockets, ready to clip onto ball studs.
❌ Cons :
- Superseded by the 100107, which adds internal rod guidance.
- Fixed force of 800 N, not adjustable.
- Not interchangeable with a standard push-type gas spring.
Conclusion
If the strut on your Dufour is printed 100099, or measures 550 mm at rest and 950 mm extended with an 800 N pulling force, this is the right part. Since it has been updated, the 100107 is the recommended replacement today: it fits the same way and its internal rod support adds steadiness over the 400 mm stroke. If your strut pushes rather than pulls, or if its dimensions differ, this reference will not fit. Contact our team to identify the correct gas spring before ordering.
Good to Know
- Traction strut: the force pulls the ends together. Check the pulling direction against your original part.
- Measure between the centres of the ball sockets: 550 mm retracted / 950 mm extended.
- Updated version: 100107, with the same dimensions and force plus internal rod support.
- Originally supplied to Dufour Yachts.
- Browse our full range of marine gas springs.

Electrical
Marine Batteries
Mechanical
Gas Springs
Seat suspensions
Table solutions
TV Lift

English spoken
On parle Français

Reviews
There are no reviews yet.