Description of the 081110 stainless steel gas spring
The 081110 stainless steel gas spring from Ressorts SPEC is a 316L marine-grade gas strut engineered for long-term durability in the harsh conditions found aboard sailing yachts and motor boats. Salt spray, humidity, temperature swings and constant vibration are part of daily life at sea, and this gas spring has been designed to cope with all of them. Fabricated entirely from 316L stainless steel, the 081110 has been tested to the ASTM B117 standard and withstands up to 500 hours of continuous salt spray exposure. This level of corrosion resistance makes it a reliable choice for exposed deck equipment as well as for components installed in the cockpit or engine room. The strut delivers a strong and progressive force of 500 Newtons, increasing up to 700N under full compression. Combined with a 200 mm stroke and a body length of 449 mm (measured without end fittings), it provides powerful and controlled lifting support for heavy onboard elements such as:
- Deck hatches
- Engine covers and engine room hatches
- Cockpit lockers and lazarette lids
The 081110 features a 10 mm shaft and a 23 mm body diameter, with an M8x1.25 thread on the body side to receive the end fitting. It operates reliably from -25°C to +80°C, covering the temperature range met on board, from winter storage to sun-exposed decks in summer. Designed for a long service life of up to 30,000 cycles, it is a durable replacement for worn or weakened original gas struts. Please note: this gas spring is delivered without end fittings. Compatible M8x1.25 ball joints or clevises must be selected separately according to the original mounting configuration of your boat.
Specifications
- Reference: 081110
- Manufacturer: Ressorts SPEC
- Material: 316L marine-grade stainless steel
- Force: 500N nominal, up to 700N at full compression
- Stroke: 200 mm
- Body length (excluding end fittings): 449 mm
- Shaft diameter: 10 mm
- Body diameter: 23 mm
- Thread for end fitting (body side): M8x1.25
- Operating temperature: -25°C to +80°C
- Corrosion test: ASTM B117 – 500 h salt spray
- Service life: up to 30,000 cycles
- End fittings: Not included – sold separately
Compatibility
This gas spring suits many yacht configurations. It is particularly suitable for Beneteau and Jeanneau vessels where a 500N force and a 449 mm body length are required. Before ordering, always check the dimensions and force of your original gas strut: body length, stroke, force and thread size must match to guarantee correct operation of the hatch or cover.
Installation / Maintenance
Installation
- Secure the hatch or cover in the open position before removing the old gas spring
- Measure the original strut (body length, stroke, force, thread) to confirm compatibility
- Select M8x1.25 marine-grade end fittings (ball joints or clevises) matching your brackets
- Screw the end fittings onto the gas spring
- Fit the gas spring onto its mounting points
- Carry out several opening/closing cycles to check smooth operation
Maintenance
- Rinse the gas spring with fresh water after each use
- Apply silicone or marine-grade lubricant regularly to the shaft and attachment points
- Avoid sand or debris building up near the seals
- Inspect the end fittings and brackets periodically for wear or corrosion
Our review
✔ Pros
- 316L marine-grade stainless steel – ideal for saltwater environments
- Strong 500N force suitable for heavy hatches and covers
- Compatible with common M8x1.25 marine ball joint end fittings
- Designed for long life – up to 30,000 cycles
✘ Cons
- End fittings not included – must be ordered separately
- Dimensions and force must be checked against the original strut
Conclusion
With robust lifting force and marine-grade corrosion resistance, the 081110 gas spring from Ressorts SPEC is an excellent choice for demanding nautical applications. If your original strut offers 500N over a 200 mm stroke with a 449 mm body, this model is a reliable, long-lasting replacement. Buying the end fittings separately takes a little extra planning, but it lets you match your existing brackets exactly. Ideal for hatches, lockers and other onboard mechanisms exposed to the elements.
Good to Know
- Body length of 449 mm is measured without end fittings
- Force increases progressively from 500N up to 700N at full compression
- Always compare force and dimensions with the original gas strut before replacing
- Use marine-grade stainless steel end fittings to keep the corrosion resistance of the assembly
- Regular freshwater rinsing significantly extends the life of the seals

Electrical
Marine Batteries
Mechanical
Gas Springs
Seat suspensions
Table solutions
TV Lift

English spoken
On parle Français

Reviews
There are no reviews yet.