The NL2388-PAIRE-B electric table lift kit<\/strong> is a complete, ready-to-install solution for motorizing a large table aboard yachts<\/strong>, motor boats<\/strong> and catamarans<\/strong> fitted with a 12V DC<\/strong> network. It combines two NL2388<\/a> electric table legs<\/strong> with the control box,and remote control , so the builder or owner orders a single reference with every component matched.<\/p>\n Each table pedestal<\/strong> is a 3-stage, rectangular-section aluminium column with a clear anodized finish. It offers a 400 mm stroke, from 358 mm retracted to 758 mm fully extended, and can stop at any height in between. One table can therefore serve as a dining table, a coffee table or a base for converting a cockpit seating area into a sundeck. With an IP55<\/strong> protection rating, the legs can be installed indoors or outdoors, in the saloon as well as in the cockpit or on the flybridge.<\/p>\n The heart of the kit is the NL2120<\/a> control box. It reads the position of both legs and keeps them moving in step, so the table top stays level throughout its travel, without mechanical stress on the table structure or on the pedestals.\u00a0The NL1494<\/a> rocker switch adds a wired, momentary control point, for example on a bulkhead or a console.<\/p>\n The two motorized table bases<\/strong> are fixed with 200 x 200 x 8 mm plates, top and bottom, for a stable mounting on the cabin sole or cockpit floor. Each leg accepts a dynamic load of 50 kg and a static load of 100 kg, rising to 200 kg with compression locking.<\/p>\n The NL2388-PAIRE-B<\/strong>\u00a0is the simplest way to motorize a large table on a 12V DC<\/strong> boat: every component is matched and supplied together, with no risk of choosing an incompatible control box. Its IP55<\/strong> rating allows installation in the saloon as well as in the cockpit or on the flybridge. It suits shipyards equipping a new model as well as owners upgrading a manual or gas-assisted table during a refit. Before ordering, check that your onboard network is 12V, that the table top and its expected use stay within 50 kg dynamic load per leg, and that the legs can be placed within 5 m of the control box. For a 24V boat, choose the NL2389-PAIRE-B<\/strong>\u00a0kit. For a single-pedestal table, a single NL2388<\/a> with its own control is more appropriate.<\/p>\n<\/div>\nElectric table lift kit NL2388-PAIRE-B- Kit contents<\/h3>\n
\n
Electric table lift kit NL2388-PAIRE-B- Specifications<\/h3>\n
Table legs (x2):<\/h4>\n
\n
Controls:<\/h4>\n
\n
Electric table lift kit NL2388-PAIRE-B- Installation \/ Maintenance<\/h3>\n
Installation:<\/h4>\n
\n
Maintenance:<\/h4>\n
\n
Electric table lift kit NL2388-PAIRE-B- Our review<\/h3>\n
\u2714\ufe0f Pros :<\/h4>\n
\n
\u274c Cons :<\/h4>\n
\n
Electric table lift kit NL2388-PAIRE-B- Conclusion<\/h3>\n